Parameter Reference
Default Value = (no default value)
INI File Parameter Name = telSerAddrSrvr
Note: Unit requires a restart if this parameter value is changed.
3.5.11
Serial CPID Expiration
Description: Specifies the time in milliseconds that serial CPID information received by a Media
Gateway (Master or Slave) remains valid. If the timeout expires before an inbound call is received
on the Media Gateway PBX port indicated by the serial CPID information, the serial CPID
information is discarded.
Allowed Values: 100 to 60000 milliseconds
Default Value = 2000 milliseconds
INI File Parameter Name = telSerCpidExpMs
3.5.12
Logical Extension Number
Description: Specifies the extension number assigned to each PBX port on the Media Gateway.
This information must match the terminal numbers assigned to the ports connected to the Media
Gateway in serial protocol administration at the PBX.
Allowed Values: 0 to 9999
Default Value = 0
INI File Parameter Name = telSerClientLtn
Note: Unit requires a restart if this parameter value is changed.
3.6
Gateway Parameters
The Gateway parameters include the following groups:
•
Gateway Routing Group
•
Gateway Advanced Group
•
Gateway Capabilities Group
3.6.1
Gateway Routing Group
The Gateway Routing group includes the following subgroups:
Call Routing Group
•
66
®
Dialogic
1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation