Gateway Capabilities Group; Telephony Port Capability; Telephony Port Enabled - Dialogic DMG1000 User Manual

Parameter Reference
3.6.3

Gateway Capabilities Group

The Port Capabilities parameters allow you to individually configure the call control capabilities of
each port connected to the Media Gateway. These parameters also allow you to enable or disable
individual ports. The Port Capabilities group includes the following parameters:
• Port #
•

Telephony Port Capability

•

Telephony Port Enabled

3.6.3.1 Port #
Description: This is a read-only parameter that defines the Media Gateway port numbers.
Note: If the T1/E1 signaling mode is configured for ISDN, the Port # refers to the T1 or E1 span number.
3.6.3.2 Telephony Port Capability
Description: Specifies the types of requests that the Media Gateway port may service.
Allowed Values:
MWIs-Only = Port will only service MWI requests. The port should not be part of a PBX call
•
hunt group.
• Calls-Only = Port will only service calls. MWI requests will not be serviced by this port.
• Both = Port will service both MWI requests and calls.
Default Value = Both
INI File Parameter Name = telPortCapability
3.6.3.3 Telephony Port Enabled
Description: Specifies whether the telephony port is disabled or enabled. Disabled ports drop
communications links to the PBX.
Note: If the T1/E1 signaling mode is configured for ISDN, the Port # refers to the T1 or E1 span number.
Allowed Values:
Yes = Port is enabled and is capable of providing a connection. The LED for this port may or
•
may not be green, depending on whether or not a line is plugged in.
• No = Port is disabled and is incapable of providing a connection. The LED for this port will be
red, regardless of whether or not a line is plugged in.
Default Value = Yes
INI File Parameter Name = telPortEnabled
86
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation