Dialogic DMG1000 User Manual page 108

Parameter Reference
• Verify TLS Peer Certificate Trust
3.9.4.1 TLS Transport Enabled
Description: Determines whether the TLS transport is enabled or disabled.
Allowed Values:
• Yes = TLS transport is enabled.
• No = TLS transport is disabled.
Default Value = No
INI File Parameter Name = sipTlsEnabled
Note: Unit requires a restart if this parameter value is changed.
3.9.4.2 TLS Server Port
Description: The Transport Layer Security (TLS) Port of the Media Gateway on which SIP TLS
messages are sent/received.
Allowed Values: 1024 - 65000
Default Value = 5061
INI File Parameter Name = sipTlsServerPort
Note: Unit requires a restart if this parameter value is changed.
3.9.4.3 SSL TLS Protocol
Description: Specifies the default SSL record type to be used on TLS connections.
Allowed Values:
• SSLv3_TLSv1 = Connection will understand both the SSLv3 and TLSv1 protocols.
• SSLv3_Only = Connection will only understand the SSLv3 protocol.
TLSv1_Only = Connection will only understand the TLSv1 protocol.
•
Default Value = SSLv3_TLSv1
INI File Parameter Name = secSipTlsProtocol
Note: Unit requires a restart if this parameter value is changed.
108
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation