Parameter Reference
3.7.1.3
Interface Side
Description: Identifies the side of the connection.
Allowed Values:
•
Terminal = Terminal (user) side of device
Network = Network side of device
•
Default Value = Terminal
INI File Parameter Name = t1e1Interface
3.7.2
T1 CAS Protocol Group (T1 CAS Signaling Mode)
The parameters in the T1 CAS Protocol group include the following:
T1 CAS Protocol
•
Line Encoding
•
•
Framing
•
Selects Transmit Pulse Waveform
•
Flash Hook
Incoming Rings Before Answer
•
•
Ringing Timeout (msec)
•
Ring Cycle Time
•
Consult Call Dialtone Drop Code
Consult Call Proceeding Drop Code
•
Consult Call Busy Drop Code
•
•
Consult Call Connected Drop Code
•
Consult Call Disconnected Drop Code
•
Consult Call Error Drop Code
MWI Confirmation Tone
•
•
CPID Type
•
Initial Wait for Inband CPID (msecs)
•
Inband CPID Complete Timeout (msecs)
3.7.2.1
T1 CAS Protocol
Description: If T1 CAS is selected as the Signaling Mode, specifies the T1 CAS protocol to be
used.
Allowed Values:
•
Loop Start = Loop Start protocol will be used.
88
®
Dialogic
1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation