Inbound Voip Call Routing; Web Configuration Interface; Inbound Voip Call Routing Configuration Web Page - Dialogic DMG1000 User Manual

Dial Plan
Calling Party Change Rule - The formula as specified in the section above that determines the
calling party number of the outgoing call.
Called Party Change Rule - The formula as specified in the section above that determines the
called party number of the outgoing call.
Redirecting Party Change Rule - The formula as specified in the section above that determines
the redirecting party number of the outgoing call.
See Section 5.7, "Web Configuration
interface.
5.5

Inbound VoIP Call Routing

The Inbound VoIP Call Routing table is the main table used to route calls originating from the VoIP
interface. When a call is received, the incoming call characteristics are compared against the values
entered in the first row of the table. If a match is found, an action is taken. If no match is found, the
next row in the table is checked. Rows will be tested until a match is found, or there are no more
entries in the table.
The VoIP address, calling number, and called number all need to match the incoming call for the
test to pass. Once a match occurs, the CPID will be modified based on the CPID manipulation rule
selected in the table. Next, the outgoing call will be made out the TDM interface using the channel
pool selected.
If no rows in the table successfully match the incoming call, the call is not routed.
Note: If a server list is configured, the call will still be routed via the server list.
5.5.1

Web Configuration Interface

Figure 21 is a screen shot of the Inbound VoIP Call Routing configuration Web Page:
Figure 21. Inbound VoIP Call Routing Configuration Web Page
156
Notes", on page 158 for more details on using the Web
®
Dialogic 1000 and 2000 Media Gateway Series User's Guide — September 2007
Dialogic Corporation