4.2 DONE BY AUTHORIZED MUTOH TECHNICIAN
This section describes the periodical part replacement and the periodical inspections required for this printer.
These periodical services ensure the stable printing quality of the printer.
4.2.1 Periodical replacement of parts
Perform periodical replacements according to the table below. These replacements should be executed by
an authorized Mutoh technician and are necessary to ensure the best printing quality output.
4.2.2 Periodical inspection part list
Perform periodical inspections according to the table: "Periodical Inspection Part List" and perform cleaning
and part replacement as necessary.
Part
Media guide
Sub platen front surface
Timing fence
(CR encoder detection slit plate)
Rail on the CR guide frame
P_REAR sensor front surface
Part
Maintenance station
Wiper
Damper
Operation Instructions ValueJet 1604W
Chapter 4 : Periodical maintenance
Timing
Once a year
Once a year
Once a year
Timing
Once a year
Once a year
Once a year
Once a year
53
Check point
Media dust accumulation
Foreign objects
Damages
Media dust accumulation
Foreign objects
Damages
Foreign objects
Media dust accumulation
Foreign object
AP-77300 – Rev 1.1 -17/09/2009,