Replacing Heater Cont Board Assy - MUTOH ValueJet VJ-1324 Maintenance Manual

3.4 Replacing Board Base
3.4.7

Replacing HEATER CONT Board Assy

T I P
Replacing Procedure For Maintenance Part:HEATER CONT Board2 Assy.
This part will be referred to as the HEATER CONT Board Assy in this manual.
1. Remove Paper Guide R2.
"3.2.7 Removing Paper Guide R2" p.3-17
Remove controller board bracket.
2.
"3.4.6 Removing Controller Board Bracket" p.3-44
3. Remove the screws (4 pieces) retaining HEATER CONT board Assy to controller board bracket.
1
No.
1
HEATER CONT Board Assy
×
2 Cup screw M3 6
controller board bracket
3
4. Remove HEATER CONTROL 2 board Assy from controller board bracket.
5. Replace HEATER CONTROL 2 board Assy .
6. To reassemble the unit, reverse the removal procedure.
3.4.7 Replacing HEATER CONT Board Assy
2
3
2
Name
。
Install the latest firmware on MAIN board Assy.
7.
"4.3 Working with MUTOH Service Assistance Software" p.4-4
Install the latest firmware on HEATER CONT board Assy.
8.
"4.3 Working with MUTOH Service Assistance Software" p.4-4
9. Perform various adjustment.
"4.2 Adjustment Item" p.4-2
VJ1324E-M-02
P.3-46