Removing Take Up Unit Cover - MUTOH ValueJet 1304 Service Manual

4 Parts Replacement
7. To reassemble the unit, reverse the removal procedure.

4.12.3 Removing Take Up Unit Cover

NOTE
Lower the release lever to the FREE side before removing the take up unit cover.
1. Remove the screw (set screw: 1) that retains the knob.
2
2. Remove the screws (pan head small screw M3
1
2
Rev.-01
CS9050, CS9150
No.
1
×
8: 2 pieces) that retain the rubber foot.
No.
1
4-96
VJ-1304 Maintenance Manual
Part name
1
Knob
2 Screws that retain the knob (set
screw)
Part name
1
Rubber foot
2 Screws that retain the rubber
foot (pan head small screw M3
8)
×