Head Height Adjustment - MUTOH ValueJet VJ-1604W Operation Instructions Manual

3.2.4 Head height adjustment

When used?
Use the head height adjustment feature when printing at high speeds or when using strongly curved media.
This way you prevent the print head from touching the media.
Notes

If the head height adjustment lever is raised, high print quality will not be guaranteed.

Do not open the front cover nor change the head height during printing. If the head height is changed,
the head alignment will be changed and high print quality will no longer be guaranteed.
Procedure:
Open the front cover.
Step 1 :
Move the head height adjustment lever (orange) to change the head height.
Step 2 :
Notes

Do not raise the head height adjustment lever higher than the following position, doing so may damage
the printer.

The high lamp on the operation panel lights up in green.
Close the front cover
Step 3 :
High
1
N°
1 Head height adjustment lever
Operation Instructions ValueJet 1604W
Name
34 AP-77300 – Rev 1.1 -17/09/2009,
Chapter 3 : Installing the Unit