Head Height Adjustment - MUTOH ValueJet VJ-1604 Operation Instructions Manual

3.7 HEAD HEIGHT ADJUSTMENT

When used?
Use the head height adjustment feature when printing at high speeds or when using strongly curved media.
This way you prevent the print head from touching the media.
Notes
•
If the head height adjustment lever is raised, high print quality will not be guaranteed.
•
Do not open the front cover nor change the head height during printing. If the head height is changed,
the head alignment will be changed and high print quality will no longer be guaranteed.
•
To perform a head alignment, refer to "Head height alignment"
Procedure:
Open the front cover.
Step 1 :
Change the head height by moving the head height adjustment lever. ( Orange)
Step 2 :
Notes
•
Do not raise the head height adjustment lever higher than the following position, doing so may damage
the printer.
•
The high lamp on the operation panel lights up in green.
Close the front cover.
Step 0 :
High
1
No.
1 Head height adjustment lever
Name
41
Operation Instructions VJ-1604
AP-75769 - Revision 1.0 –2/04/2007
English