Print Quality Adjustment - MUTOH VJ-2638 Operation Manual

Before using
3.6

Print quality adjustment

It is used for optimizing the quality of image prints.
Adjustment methods for this printer are as follows.
Adjustment
method
Standard Adjustment is performed only for the print mode set by the
current User Type.
Custom Adjustment is performed for all print modes that can be set by
the current User Type.
NOTE
• When newly setting or changing the user type setting after adjusting Standard adjust print, make
sure to adjust print.
• When changing the print mode after performing standard head alignment, make sure you adjust
print head.
• Since all print modes are adjusted at once after performing Custom adjust print, adjust print is not
required even after changing the print mode.
• When specifying a print mode for RIP software, etc, that is different from the mode set in the
usertype setting, perform Custom head adjustment and check all patterns (A to F), and then adjust
any patterns that are misaligned beforehand.
• Print quality may improve by head alignment in the following situations:
For adjustment procedure, see
• Print quality is poor when using the uni-direction print mode.
Details of print mode
• Print quality does not improve even after performing print quality adjustment
• After you have performed head alignment, make sure you perform print quality adjustment.
There may be misalignment caused by head alignment.
136
VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL
Description
3.5.6 Head alignment
Reference
3.6.1 Standard print quality
adjustment
3.6.2 Custom print quality
adjustment
3.6 Print quality adjustment