VJ-1324 OPERATION MANUAL
(5) Micro Adj.Change menu
Sets up Micro Adjustment Change.
Setup item
Micro Adj.Change
5.1.1.1.5
Pre-heater menu
Sets the temperature of the pre-heater.
Set to curb a rapid temperature change at the printing portion by pre-heating the media before printing.
NOTE
• The set temperature of the pre-heater differs depending on the media.
For the set temperatures of the pre-heater, refer to "recommended media list".
Setup item
Pre heater
5.1 Setup menu
Setting
-5.00% to <0.00> to 5.00%
—
Setting
Off / <30 °C> to 50 °C
—
Description
Sets up Micro Adjustment Change.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Description
Sets the temperature of the pre-heater.
3
1.Roll media
2.Pre heater
3.Print head
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type menu
Panel setup menu
2
1
169