5 Panel setup menu
5.1.28 Heater Control menu (VJ-1628X only)
NOTE
• This function is not displayed for VJ-1624WX/1924WX.
)You can set the heater operations based on your usage environment.
If the media becomes wavy while printing due to heat, setting the heater operations may improve the
results.
Setup Item
Heater Ctrl
254
Description
<Normal>
Fixer
Dryer
—
VJ-1624X/1624WX/1924WX OPERATION MANUAL
Setup Item
Normal heater operations are performed. When the media
does not become wavy, use this setting.
When you want to shorten the printing time and prevent the
media from becoming wavy, use this setting.
Use this setting if you want to curb waviness of the media
without deteriorating the drying performance for the print
result when using the take-up device.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
5.1 Setup menu