Heater System Control Panel - MUTOH ROCKHOPPER 62 inch Operation Instructions Manual

Control Panel Operation Instructions Rockhopper Printer

HEATER SYSTEM CONTROL PANEL.

1 2 3
1 = Controls Front Heater
2 = Controls Rear Heater
3 = Power Switch
Power Switch:
Control for power ON or OFF the Heater System.
Controls Front Heater:
Set temperature for the front heater. Real (RT) and set (ST) temperature are displayed on the LCD screen.
The maximum temperature is 50 °C. By pushing the buttons you can select an appropriate temperature.
Controls Rear Heater:
Set temperature for the rear heater. Real (RT) and set (ST) temperature are displayed on the LCD screen.
The maximum temperature is 50 °C. By pushing the buttons you can select an appropriate temperature.
AP-75024 Rev. 1.2. – 18/08/2002
74
Page