Composing And Sending Sms - NTT docomo STYLE Series Instruction Manual

2
Enter the terminal security code/t/i.
: To modify saved contents, select a set receive entry.
: To delete a set receive entry: Select the receive
[Yes].
3
Enter an Area Mail name/t.
: Enter up to 30 single-byte (15 double-byte) characters.
4
Enter a MessageID/t.
Setting time to beep
1
In stand-by, press m/[Mail setting]/[Area Mail
setting]/[Beep time].
2
Enter the time to beep/t.
Compose and send SMS

Composing and sending SMS

Exchange messages with users of non-DOCOMO overseas
telecommunications carriers. Refer to the DOCOMO website for
information on available countries and overseas
telecommunications carriers.
1
In stand-by, press m/[Compose SMS].
2
Select the [To] field/t/select the entry method.
;
Select [Search phonebook]/select a recipient/t.
;
Select [Direct input]/enter an address/t.
;
Select [Sent messages]/select a recipient/t.
;
Select [Rcvd messages]/select a recipient/t.
: To check the address: Select the address/t/[View
address].
: Enter up to 20 digits for a recipient's phone number.
: When the recipient is saved in the phonebook, the name
appears in the recipient field.
150
entry/m/
<Beep time>
3
Select [Msg]/enter the message/t.
4
Press i.
: To save an SMS: Press C/[Save].
: To set Report request: Press C/[Report request]/select the
setting/t.
: To set SMS expiry: Press C/[SMS expiry]/select the
expiration date/t.
When an address is entered, [+] can only be entered at the
beginning. Up to 21 digits can be entered when [+] is entered.
For addresses of non-DOCOMO overseas telecommunications
carriers, enter [+] (press 0 for 1+ seconds), the country code,
and the recipient's mobile phone number. If the phone number
begins with 0, omit the 0. Alternatively, enter 010, the country code
and the phone number. Add 010 to reply to SMS received from
abroad.
Single-byte katakana and pictographs in SMS text may not appear
correctly for recipient.
SMS that cannot be sent for an unspecified reason is saved as
unsent SMS.
Depending on the signal status, text for recipient may not appear
correctly.
When the 2in1 mode is set to [B mode], SMS cannot be composed
and sent.
SMS can be sent even when 186 or 184 is added. However, SMS
can be sent with caller ID notified even when 184 is added.
Editing and sending sent/saved SMS
Sent/Saved SMS can be edited and sent in the same method as mail
(nP. 130).