Questionable:condition; Questionable:enable; Questionable; Condition - Agilent Technologies E1445A User's Manual And Scpi Programming Manual

STATus

:QUEStionable:CONDition?

Comments
Example

:QUEStionable:ENABle

Parameters
Comments
Example
386 Command Reference
STATus:QUEStionable:CONDition?
Signal Condition Register. Reading the register does not affect its contents.
Executable when Initiated: Yes
Coupling Group: None
Related Commands:
STATus
*RST Condition: All bits of the Condition Register are cleared as a result of the
state present after *RST
condition persists.
Querying the Questionable Signal Condition Register
STAT:QUES:COND?
STATus:QUEStionable:ENABle <
Questionable Signal Event Register are included in its Summary bit. The Summary
bit is the bit-for-bit logical AND of the Event Register and the unmasked bit(s).
Parameter Parameter
Name
< unmask > numeric or
non-decimal
numeric
The non-decimal numeric forms are the #H, #Q, or #B formats specified by
IEEE-488.2.
Executable when Initiated: Yes
Coupling Group: None
Related Commands: STATus
*RST Condition: Unaffected
Power-on Condition:
Setting the Questionable Signal Register Enable Mask
STAT:QUES:ENAB #H0040
returns the contents of the Questionable
commands,
*SRE
, except for the Calibration bit, which will remain set if the
Queries Questionable Signal Condition
Register.
unmask > specifies which bits of the
Range of
Type Values
0 through +32767
commands, *SRE
STATus:QUEStionable:ENABle 0
Enables summary on Waiting for Arm bit.
,
*STB?
Default
Units
none
, *STB?
Chapter 8