Figure 1-10 Completing Hardware Driver Installations; Figure 1-11 Usb Device Alias Configuration - Agilent Technologies U2000H Operating And Service Manual

6 Click Finish when the installation has completed.

Figure 1-10 Completing hardware driver installations

7 Once the driver installation has completed, the Assign USB device alias

Figure 1-11 USB device alias configuration

U2000 Series Operating and Service Guide
window may appear as shown below. Each time a USB device is plugged in,
this dialog will be shown. To configure or disable this dialog, select an
options in the Show this dialog panel and click OK.
Introduction 1
17