Display Mld Proxying Group - HP 6125G Command Reference Manual

Field
Total 1 MLD Group reported
Version1-querier-present-timer-expiry

display mld proxying group

Syntax
display mld proxying group [ ipv6-group-address ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-group-address: Displays the information of the specified MLD proxying group. The group address is
in the form of FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, through FF0y::), where x and y
represent any hexadecimal number ranging from 0 to F. If this argument is not specified, this command
displays the information of all the MLD proxying groups.
verbose: Displays detailed MLD proxying group information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mld proxying group to display MLD proxying group information.
Examples
# Display MLD proxying group information on all interfaces.
<Sysname> display mld proxying group verbose
Proxying group record(s) information
Total 1 MLD-Proxying group record(s)
Group: FF03::101
Group mode: include
Member state: Delay
Expires: 00:00:02
Source list (total 1 source(s))
Source: 30::1
Description
Total number of MLD groups the interface has dynamically
joined
Remaining time of the MLDv1 querier present timer, where "off"
means that the timer never times out
275