HP 6125G Command Reference Manual page 193

Ip multicast
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

BGP current event: RecvKeepalive
BGP last state: OpenConfirm
Port:
Local - 1029
Configured: Active Hold Time: 180 sec
Received
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Peer support bgp route AS4 capability
Address family IPv4 Unicast: advertised and received
Address family IPv4 Multicast: advertised and received
Received: Total 5 messages, Update messages 1
Sent: Total 4 messages, Update messages 0
Maximum allowed prefix number: 4294967295
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
Route refresh capability has been enabled
ORF advertise capability based on prefix (type 64):
Local: both
Negotiated: send
Peer Preferred Value: 0
BFD: Enabled
Routing policy configured:
No routing policy is configured
Table 41 Command output
Field
Peer
Local
Type
BGP version
remote router ID
BGP current state
BGP current event
BGP last state
Port
Configured: Active Hold Time: 180 sec
Keepalive Time: 60 sec
Received: Active Hold Time
Negotiated: Active Hold Time Keepalive
Time:60 sec
Remote - 179
: Active Hold Time: 180 sec
181
Keepalive Time: 60 sec
Keepalive Time: 60 sec
Description
IP address of the peer.
Local router ID.
Peer type.
BGP version.
Router ID of the peer.
Current state of the peer.
Current event of the peer.
Previous state of the peer.
TCP port numbers.
Local holdtime interval and keepalive interval.
Remote holdtime interval.
Negotiated holdtime interval and keepalive interval.

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents