Mld-Snooping Static-Group - HP 6125G Command Reference Manual

[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping special-query source-ip fe80:0:0:1::1

mld-snooping static-group

Syntax
mld-snooping static-group ipv6-group-address [ source-ip ipv6-source-address ] vlan vlan-id
undo mld-snooping static-group ipv6-group-address [ source-ip ipv6-source-address ] vlan vlan-id
View
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
ipv6-group-address: Specifies the address of the IPv6 multicast group that the port will join as a static
member port. The value ranges from FFxy::/16—excluding FFx0::/16, FFx1::/16, FFx2::/16 and FF0y::,
where x and y represent any hexadecimal number between 0 and F, inclusive.
ipv6-source-address: Specifies the address of the IPv6 multicast source that the port will join as a static
member port.
vlan vlan-id: Specifies the VLAN that comprises the Ethernet ports, where vlan-id is in the range of 1 to
4094.
Description
Use mld-snooping static-group to configure the static IPv6 (*, G) or (S, G) joining function, that is, to
configure the port as a static member port of an IPv6 multicast group or source and group.
Use undo mld-snooping static-group to restore the default.
By default, no ports are static member ports.
The source-ip ipv6-source-address option in the command is meaningful only for MLDv2 snooping. If
MLDv1 snooping is running, the source-ip ipv6-source-address option does not take effect although you
can include source-ip ipv6-source-address in the command.
In Layer 2 Ethernet interface view or Layer 2 aggregate interface view, this command takes effect only if
the interface belongs to the specified VLAN.
Examples
# Configure GigabitEthernet 1/0/1 in VLAN 2 as a static member port for (2002::22, FF3E::101).
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping version 2
[Sysname-vlan2] quit
[Sysname] interface gigabitethernet 1/0/1
245