Hello-Option Override-Interval (Ipv6 Pim View) - HP 6125G Command Reference Manual

View
IPv6 PIM view
Default level
2: System level
Parameters
None
Description
Use hello-option neighbor-tracking to globally disable join suppression, namely, to enable neighbor
tracking.
Use undo hello-option neighbor-tracking to enable join suppression.
By default, join suppression is enabled. Namely, neighbor tracking is disabled.
Related commands: pim ipv6 hello-option neighbor-tracking.
Examples
# Disable join suppression globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option neighbor-tracking

hello-option override-interval (IPv6 PIM view)

Syntax
hello-option override-interval interval
undo hello-option override-interval
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use hello-option override-interval to configure the global value of the prune override interval.
Use undo hello-option override-interval to restore the default.
By default, the prune override interval is 2500 milliseconds.
Related commands: hello-option lan-delay, pim ipv6 hello-option lan-delay, and pim ipv6 hello-option
override-interval.
Examples
# Set the prune override interval to 2000 milliseconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option override-interval 2000
330