Mld Startup-Query-Count; Mld Startup-Query-Interval - HP 6125G Command Reference Manual
Ip multicast
Hide thumbs
Also See for 6125G:
- Command reference manual (410 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
Parameters
None
Description
Use mld ssm-mapping enable to enable the MLD SSM mapping feature on the current interface.
Use undo mld ssm-mapping enable to disable the MLD SSM mapping feature on the current interface.
By default, the MLD SSM mapping feature is disabled on all interfaces.
Examples
# Enable the MLD SSM mapping feature on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld ssm-mapping enable
mld startup-query-count
Syntax
mld startup-query-count value
undo mld startup-query-count
View
Interface view
Default level
2: System level
Parameters
value: Specifies a startup query count, namely, the number of queries that the MLD querier sends on
startup, in the range of 2 to 5.
Description
Use mld startup-query-count to configure the startup query count on the current interface.
Use undo mld startup-query-count to restore the default.
By default, the startup query count is set to the MLD querier's robustness variable.
Related commands: mld robust-count and startup-query-count.
Examples
# Set the startup query count to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld startup-query-count 3
mld startup-query-interval
Syntax
mld startup-query-interval interval
undo mld startup-query-interval
291
Advertisement
Table of Contents
