Display Bgp Ipv6 Multicast Network - HP 6125G Command Reference Manual

Field
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State

display bgp ipv6 multicast network

Syntax
display bgp ipv6 multicast network [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 multicast network to display the IPv6 MBGP routes advertised with the network
command.
Examples
# Display IPv6 MBGP routes advertised with the network command.
<Sysname> display bgp ipv6 multicast network
BGP Local Router ID is 1.1.1.2.
Local AS Number is 200.
Network
2002::
2001::
Table 76 Command output
Field
BGP Local Router ID
Mask Route-policy
64
64
364
Description
Number of messages received.
Number of messages sent.
Number of messages to be sent.
Number of prefixes received.
Lasting time of a session/lasting time of present state
(when no session is established).
Peer state machine .
Short-cut
Short-cut
Description
BGP local router ID