Network (Ipv6 Mbgp Address Family View) - HP 6125G Command Reference Manual

Description
Use ipv6-family multicast to enter IPv6 MBGP address family view.
Use undo ipv6-family multicast to remove all the configurations in the IPv6 MBGP address family view.
IPv4 BGP unicast view is the default.
If the ipv6-family command is not configured in BGP view, you cannot directly configure the ipv6-family
multicast command in BGP view (see example I). If the ipv6-family command is configured in BGP view,
you can directly configure the ipv6-family multicast command in BGP view (see example II).
Examples
Example I
•
# Enter IPv6 MBGP address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast
Error: Please configure IPv6 Unicast address-family first
The error information indicates that the ipv6-family command is not configured.
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul]
Example II
•
# Enter IPv6 MBGP address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul]

network (IPv6 MBGP address family view)

Syntax
network ipv6-address prefix-length [ route-policy route-policy-name | short-cut ]
undo network ipv6-address prefix-length [ short-cut ]
View
IPv6 MBGP address family view
Default level
2: System level
Parameters
ipv6-address: IPv6 address prefix.
prefix-length: Prefix length of the IPv6 address, in the range of 0 to 128.
short-cut: If the keyword is specified for an IPv6 multicast eBGP route, the route will use the local
preference rather than its own preference, and therefore it it probably does not become the optimal
route.
route-policy-name: Name of a routing policy, a case-sensitive string of 1 to 63 characters.
385