HP 6125G Command Reference Manual page 375

BGP peer-group is aaa
remote AS number not specified
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer AS
20:20::20:1 200
Table 75 Command output
Field
BGP peer-group
remote AS
Type
Maximum allowed prefix number
Threshold
Configured hold timer value
Keepalive timer value
Minimum time between advertisement runs
Route refresh capability has been enabled
ORF advertise capability based on prefix (type 64):
Local: both
Negotiated: send
Peer Preferred Value
Members
Peer
AS
MsgRcvd MsgSent OutQ PrefRcv Up/Down
170 141
363
State
0 2 02:13:35 Established
Description
Name of the IPv6 MBGP peer group.
AS number of the IPv6 MBGP peer group.
Type of the IPv6 MBGP peer group.
Maximum number of prefixes allowed to be received
from the IPv6 MBGP peer group.
Threshold value.
Hold-timer value.
Keepalive interval.
Minimum interval for route advertisement.
The route-refresh capability has been enabled.
The BGP peer supports the ORF capability based on IP
prefix. The capability value is 64.
The local BGP router supports both the ORF sending
and receiving capabilities.
Negotiation result: The local BGP router can send
route-refresh messages that carry the ORF information,
and the peer can receive route-refresh messages that
carry the ORF information.
If receive is displayed, the local BGP router can
receive route-refresh messages that carry the ORF
information, and the peer can send route-refresh
messages that carry the ORF information. This field is
not displayed if neither the send nor the receive
capability is supported.
Preferred value of the routes from the peer.
Group members.
IPv6 address of the peer.
AS number.