C-Rp Advertisement-Interval (Pim View); C-Rp Holdtime (Pim View) - HP 6125G Command Reference Manual
Ip multicast
Hide thumbs
Also See for 6125G:
- Command reference manual (410 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
[Sysname-acl-basic-2000] rule permit source 226.2.0.0 0.0.255.255
[Sysname-acl-basic-2000] quit
[Sysname] pim
[Sysname-pim] c-rp vlan-interface 100 group-policy 2000 priority 10
c-rp advertisement-interval (PIM view)
Syntax
c-rp advertisement-interval interval
undo c-rp advertisement-interval
View
PIM view
Default level
2: System level
Parameters
interval: C-RP-Adv interval in seconds, with an effective range of 1 to 65,535.
Description
Use c-rp advertisement-interval to configure the interval at which C-RP-Adv messages are sent.
Use undo c-rp advertisement-interval to restore the default.
By default, the C-RP-Adv interval is 60 seconds.
Related commands: c-rp.
Examples
# Set the global C-RP-Adv interval to 30 seconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-rp advertisement-interval 30
c-rp holdtime (PIM view)
Syntax
c-rp holdtime interval
undo c-rp holdtime
View
PIM view
Default level
2: System level
Parameters
interval: C-RP timeout in seconds, with an effective range of 1 to 65,535.
101
Advertisement
Table of Contents
