Multicast Ipv6 Longest-Match - HP 6125G Command Reference Manual

View
System view
Default level
2: System level
Parameters
source: Specifies IPv6 multicast load splitting on a per-source basis.
source-group: Specifies IPv6 multicast load splitting on a per-source and per-group basis.
Description
Use multicast ipv6 load-splitting to enable load splitting of IPv6 multicast traffic.
Use undo multicast ipv6 load-splitting to disable load splitting of IPv6 multicast traffic.
By default, load splitting of IPv6 multicast traffic is disabled.
Examples
# Enable load splitting of IPv6 multicast traffic on a per-source basis.
<Sysname> system-view
[Sysname] multicast ipv6 load-splitting source

multicast ipv6 longest-match

Syntax
multicast ipv6 longest-match
undo multicast ipv6 longest-match
View
System view
Default level
2: System level
Parameters
None
Description
Use multicast ipv6 longest-match to configure RPF route selection based on the longest match principle,
namely, to select the route with the longest prefix as the RPF route.
Use undo multicast ipv6 longest-match to restore the default.
By default, the route with the highest priority is selected as the RPF route.
Examples
# Configure RPF route selection based on the longest match.
<Sysname> system-view
[Sysname] multicast ipv6 longest-match
264