Display Mld Ssm-Mapping Group - HP 6125G Command Reference Manual

View
Any view
Default level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal
number ranging from 0 to F.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mld ssm-mapping to display the configured MLD SSM mappings for the specified IPv6
multicast group.
Related commands: ssm-mapping.
Examples
# Display the MLD SSM mappings for multicast group FF1E::101.
<Sysname> display mld ssm-mapping ff1e::101
Group: FF1E::101
Source list:
1::1
1::2
10::1
100::10
Table 63 Command output
Field
Group
Source list

display mld ssm-mapping group

Syntax
display mld ssm-mapping group [ ipv6-group-address | interface interface-type interface-number ]
[ verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Description
IPv6 multicast group address
List of IPv6 multicast source addresses
278