Pim Hello-Option Dr-Priority; Pim Hello-Option Holdtime - HP 6125G Command Reference Manual
Ip multicast
Hide thumbs
Also See for 6125G:
- Command reference manual (410 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim dm
pim hello-option dr-priority
Syntax
pim hello-option dr-priority priority
undo pim hello-option dr-priority
View
Interface view
Default level
2: System level
Parameters
priority: Router priority for DR election, in the range of 0 to 4294967295. A larger value of this argument
means a higher priority.
Description
Use pim hello-option dr-priority to configure the router priority for DR election on the current interface.
Use undo pim hello-option dr-priority to restore the default.
By default, the router priority for DR election is 1.
Related commands: hello-option dr-priority.
Examples
# Set the router priority for DR election to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option dr-priority 3
pim hello-option holdtime
Syntax
pim hello-option holdtime interval
undo pim hello-option holdtime
View
Interface view
Default level
2: System level
Parameters
interval: PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535. A value of
65,535 makes the PIM neighbor always reachable.
Description
Use pim hello-option holdtime to configure the PIM neighbor timeout time on the current interface.
126
Advertisement
Table of Contents
