Hello-Option Dr-Priority (Ipv6 Pim View); Hello-Option Holdtime (Ipv6 Pim View) - HP 6125G Command Reference Manual
Ip multicast
Hide thumbs
Also See for 6125G:
- Command reference manual (410 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
[Sysname-acl6-basic-2000] rule permit source ff7e:140:20::101 64
[Sysname-acl6-basic-2000] quit
[Sysname] pim ipv6
[Sysname-pim6] embedded-rp 2000
hello-option dr-priority (IPv6 PIM view)
Syntax
hello-option dr-priority priority
undo hello-option dr-priority
View
IPv6 PIM view
Default level
2: System level
Parameters
priority: Router priority for DR election, in the range of 0 to 4294967295. A larger value means a higher
priority.
Description
Use hello-option dr-priority to configure the global value of the router priority for DR election.
Use undo hello-option dr-priority to restore the default.
By default, the router priority for DR election is 1.
Related commands: pim ipv6 hello-option dr-priority.
Examples
# Set the router priority for DR election to 3.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option dr-priority 3
hello-option holdtime (IPv6 PIM view)
Syntax
hello-option holdtime interval
undo hello-option holdtime
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: IPv6 PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535. A value of
65,535 makes the IPv6 PIM neighbor always reachable.
328
Advertisement
Table of Contents
