Report source IP: FE80::2FF:FFFF:FE00:2
Done source IP: FE80::2FF:FFFF:FE00:3
Dot1p-priority: --
Table 59 Command output
Field
MLD snooping
Drop-unknown
Version
Host-aging-time
Router-aging-time
Max-response-time
Last-listener-query-interval
Report-aggregation
Dot1p-priority
Querier
Query-interval
General-query source IP
Special-query source IP
Report source IP
Done source IP
display mld-snooping group
Use display mld-snooping group to display dynamic MLD snooping forwarding entries.
Syntax
display mld-snooping group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ] [ verbose ]
[ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Description
MLD snooping status:
•
Enabled.
•
Disabled.
Status of dropping unknown IPv6 multicast data:
•
Enabled.
•
Disabled.
MLD snooping version.
Aging timer for the dynamic member port.
Aging timer for the dynamic router port.
Maximum time for responding to MLD general queries.
Interval for sending MLD multicast-address-specific queries.
Status of MLD report suppression:
•
Enabled.
•
Disabled.
802.1p priority for MLD messages, where two hyphens (--) mean that
it is not configured.
Whether the MLD snooping querier is enabled.
Interval for sending MLD general queries.
Source IPv6 address of MLD general queries.
Source IPv6 address of MLD multicast-address-specific queries.
Source IPv6 address of MLD reports.
Source IPv6 address of MLD done messages.
199