HP 6125G Command Reference Manual page 271
Ip multicast
Hide thumbs
Also See for 6125G:
- Command reference manual (410 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
Default level
1: Monitor level
Parameters
ipv6-source-address: Specifies a multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address, in the range of FFxy::/16, where x and
y represent any hexadecimal number from 0 through F.
prefix-length: Specifies the length of the prefix of a multicast group address or an IPv6 multicast source
address. For an IPv6 multicast group address, the value ranges from 8 to 128. For an IPv6 multicast
source address, the value ranges from 0 to 128. The default is 128 in both cases.
incoming-interface: Displays routing entries whose incoming interface is the specified one.
interface-type interface-number: Specifies an interface by its type and number.
register: Represents a registered interface.
outgoing-interface: Displays routing entries whose the outgoing interface is the specified one.
exclude: Displays routing entries whose outgoing interface list excludes the specified interface.
include: Displays routing entries whose outgoing interface list includes the specified interface.
match: Displays routing entries whose outgoing interface list includes only the specified interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display multicast ipv6 routing-table to display information about the IPv6 multicast routing table.
IPv6 multicast routing tables are the basis of IPv6 multicast forwarding. You can determine the
establishment state of an (S, G) entry by viewing the IPv6 multicast routing table.
Related commands: display multicast ipv6 forwarding-table.
Examples
# Display information about the IPv6 multicast routing table.
<Sysname> display multicast ipv6 routing-table
IPv6 multicast routing table
Total 1 entry
00001. (2001::2, FFE3::101)
Uptime: 00:00:14
Upstream Interface: Vlan-interface1
List of 1 downstream interface
1:
Vlan-interface2
259
Advertisement
Table of Contents
