Import-Route (Ipv6 Mbgp Address Family View); Ipv6-Family Multicast - HP 6125G Command Reference Manual

import-route (IPv6 MBGP address family view)

Syntax
import-route protocol [ process-id [ med med-value | route-policy route-policy-name ] * ]
undo import-route protocol [ process-id ]
View
IPv6 MBGP address family view
Default level
2: System level
Parameters
protocol: Redistributes routes from the protocol, which can be direct, ospfv3, ripng or static at present.
process-id: Specifies a process ID, in the range of 1 to 65535. This argument is available when the
protocol is ospfv3 or ripng.
med-value: Specifies the default MED value, in the range of 0 to 4294967295. If no MED is specified, the
cost of a redistributed route will be used as its MED in the BGP routing domain.
route-policy-name: Specifies the name of a routing policy used to filter redistributed routes, a
case-sensitive string of 1 to 63 characters.
Description
Use import-route to redistribute routes from another routing protocol.
Use undo import-route to disable route redistribution from a routing protocol.
By default, IPv6 MBGP does not redistribute routes from any routing protocol.
The ORIGIN attribute of routes redistributed through the import-route command is incomplete.
Examples
# Redistribute routes from RIPng 1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] import-route ripng 1

ipv6-family multicast

Syntax
ipv6-family multicast
undo ipv6-family multicast
View
BGP view
Default level
2: System level
Parameters
None
384