Peer Request-Sa-Enable; Peer Sa-Cache-Maximum - HP 6125G Command Reference Manual

peer request-sa-enable

Syntax
peer peer-address request-sa-enable
undo peer peer-address request-sa-enable
View
MSDP view
Default level
2: System level
Parameters
peer-address: Specifies an MSDP peer address.
Description
Use peer request-sa-enable to enable the device to send an SA request message to the specified MSDP
peer after receiving a new join message.
Use undo peer request-sa-enable to disable the device from sending an SA request message to the
specified MSDP peer.
By default, after receiving a new join message, the router does not send an SA request message to any
MSDP peer. Instead, it waits for the next SA message to come.
Before you can enable the device to send SA requests, you must disable the SA message cache
mechanism.
Related commands: cache-sa-enable.
Examples
# Disable the SA message cache mechanism, and enable the router to send an SA request message to
the MSDP peer 125.10.7.6 after receiving a new join message.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] undo cache-sa-enable
[Sysname-msdp] peer 125.10.7.6 request-sa-enable

peer sa-cache-maximum

Syntax
peer peer-address sa-cache-maximum sa-limit
undo peer peer-address sa-cache-maximum
View
MSDP view
Default level
2: System level
Parameters
peer-address: Specifies an MSDP peer address.
158