Display Msdp Sa-Count - HP 6125G Command Reference Manual

display msdp sa-count

Syntax
display msdp sa-count [ as-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
as-number: Specifies an AS number, in the range of 1 to 4294967295.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display msdp sa-count to display the number of (S, G) entries in the SA cache.
This command gives the corresponding output only after you use the cache-sa-enable command.
Related commands: cache-sa-enable.
Examples
# Display the number of (S, G) entries in the SA cache.
<Sysname> display msdp sa-count
MSDP Source-Active Count Information
Number of cached Source-Active entries, counted by Peer
Peer's Address
10.10.10.10
Number of source and group, counted by AS
AS Number of source
? 3
Total 5 Source-Active entries
Table 34 Command output
Field
MSDP Source-Active Count Information
Number of cached Source-Active entries,
counted by Peer
Peer's Address
Number of SA
Number of SA
5
Number of group
3
Description
Number of SA messages.
Number of (S, G) entries that the peer counted.
Address of the MSDP peer that sent SA messages.
Number of (S, G) entries from this peer.
151