Display Pim Ipv6 Neighbor - HP 6125G Command Reference Manual

interface-type interface-number: Displays the information of join/prune messages to send on the
specified interface.
ipv6-neighbor-address: Displays the information of join/prune messages to send to the specified IPv6
PIM neighbor.
verbose: Displays the detailed information of join/prune messages to send.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim ipv6 join-prune to display information about the join/prune messages to send.
Examples
# Display the information of join/prune messages to send in the IPv6 PIM-SM mode.
<Sysname> display pim ipv6 join-prune mode sm
Expiry Time: 50 sec
Upstream nbr: FE80::2E0:FCFF:FE03:1004 (Vlan-interface1)
1 (*, G) join(s), 0 (S, G) join(s), 1 (S, G, rpt) prune(s)
-------------------------------------------------------------------------
Total (*, G) join(s): 1, (S, G) join(s): 0, (S, G, rpt) prune(s): 1
Table 70 Command output
Field
Expiry Time:
Upstream nbr:
(*, G) join(s)
(S, G) join(s)
(S, G, rpt) prune(s)

display pim ipv6 neighbor

Syntax
display pim ipv6 neighbor [ interface interface-type interface-number | ipv6-neighbor-address |
verbose ] * [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Description
Expiry time of sending join/prune messages
IPv6 address of the upstream IPv6 PIM neighbor and
the interface that connects to it
Number of (*, G) joins to send
Number of (S, G) joins to send
Number of (S, G, rpt) prunes
320