Multicast Load-Splitting; Multicast Longest-Match - HP 6125G Command Reference Manual

Use undo multicast forwarding-table route-limit to restore the maximum number of entries in the
multicast forwarding table to the default.
By default, the upper limit is 2000.
Related commands: display multicast forwarding-table.
Examples
# Set the maximum number of entries in the multicast forwarding table to 200.
<Sysname> system-view
[Sysname] multicast forwarding-table route-limit 200

multicast load-splitting

Syntax
multicast load-splitting { source | source-group }
undo multicast load-splitting
View
System view
Default level
2: System level
Parameters
source: Specifies load splitting on a per-source basis.
source-group: Specifies load splitting both on a per-source basis and a per-group basis.
Description
Use multicast load-splitting to enable load splitting of multicast traffic.
Use undo multicast load-splitting to disable load splitting of multicast traffic.
By default, load splitting of multicast traffic is disabled.
Examples
# Enable per-source load splitting of multicast traffic.
<Sysname> system-view
[Sysname] multicast load-splitting source

multicast longest-match

Syntax
multicast longest-match
undo multicast longest-match
View
System view
Default level
2: System level
54