Display Igmp Routing-Table - HP 6125G Command Reference Manual

<Sysname> display igmp proxying group 225.1.1.1 verbose
Proxying group record(s) information
Total 1 IGMP-Proxying group record(s)
Group: 225.1.1.1
Group mode: include
Member state: Delay
Expires: 00:00:02
Source list (total 1 source(s))
Source: 1.1.1.1
Table 17 Command output
Field
Proxying group record(s) information
Total 1 IGMP-Proxying group record(s)
Group Address/Group
Member state
Expires
Group mode
Source list

display igmp routing-table

Syntax
display igmp routing-table [ source-address [ mask { mask | mask-length } ] | group-address [ mask
{ mask | mask-length } ] | flags { act | suc } ] * [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
source-address: Multicast source address.
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
mask: Subnet mask of the multicast group address or multicast source address, 255.255.255.255 by
default.
mask-length: Subnet mask length of the multicast group address or multicast source address. For a
multicast source address, this argument has an effective value range of 0 to 32. For a multicast group
address, this argument has an effective value range of 4 to 32. The system default is 32 in both cases.
Description
IGMP proxying group information.
One IGMP proxying group is recorded.
Multicast group address.
Host member states:
•
Delay.
•
Idle.
Remaining time of the multicast group, where "off" means that
the multicast group never times out.
Multicast source filtering modes:
•
Include.
•
Exclude.
List of multicast sources (only including the sources from which
hosts want to receive multicast data).
66