Peer Capability-Advertise Orf (Ipv6 Mbgp Address Family View) - HP 6125G Command Reference Manual

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 enable
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 as-path-acl 3 export

peer capability-advertise orf (IPv6 MBGP address family view)

Syntax
peer { group-name | ipv6-address } capability-advertise orf ipv6-prefix { both | receive | send }
undo peer { group-name | ipv6-address } capability-advertise orf ipv6-prefix { both | receive | send }
View
IPv6 address family view
Default level
2: System level
Parameters
group-name: Specifies a peer group by its name, a string of 1 to 47 characters.
ipv6-address: Specifies a peer by its IPv6 address.
both: Supports sending and receiving route-refresh messages carrying the ORF information.
receive: Supports receiving route-refresh messages carrying the ORF information.
send: Supports sending route-refresh messages carrying the ORF information.
Description
Use peer capability-advertise orf to enable the ORF capability for a BGP peer or peer group.
Use undo peer capability-advertise orf to disable the ORF capability for the BGP peer or peer group.
By default, the ORF capability is not enabled for a BGP peer or peer group.
• After you enable the ORF capability, the local BGP router negotiates the ORF capability with the
BGP peer through open messages. After that, the BGP router can process route-refresh messages
that carry the standard ORF information from the peer or send route-refresh messages that carry the
standard ORF information to the peer. For non-standard ORF capability negotiation, you must also
configure the peer capability-advertise orf non-standard command.
After you disable the ORF capability, the local BGP router does not negotiate the ORF capability
•
with the specified peer or peer group.
Table 86 Description of the both, send, and receive parameters and the negotiation result
Local parameter
send
Peer parameter
•
receive
•
both
389
Negotiation result
The ORF sending capability is enabled locally
and the ORF receiving capability is enabled on
the peer.