Display Multicast Routing-Table - HP 6125G Command Reference Manual

Value
0x10
0x400
0x8000
0x10000
0x80000
0x100000

display multicast routing-table

Syntax
display multicast routing-table [ source-address [ mask { mask | mask-length } ] | group-address [ mask
{ mask | mask-length } ] | incoming-interface { interface-type interface-number | register } |
outgoing-interface { exclude | include | match } { interface-type interface-number | register } ] * [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
mask: Specifies the mask of the multicast group address or multicast source address. The default is
255.255.255.255.
mask-length: Specifies the mask length of the multicast group address or multicast source address. For a
multicast group address, the value ranges from 4 to 32. For a multicast source address, the value ranges
from 0 to 32. The default is 32 in both cases.
incoming-interface: Displays the multicast routing entries, where the incoming interface is the specified
one.
interface-type interface-number: Specifies an interface by its type and number.
register: Displays the multicast routing entries, where the incoming interface is the specified register
interface of PIM-SM.
outgoing-interface: Displays the multicast routing entries, where the outgoing interface is the specified
one.
exclude: Displays the multicast routing entries, where the outgoing interface list excludes the specified
interface.
include: Displays the multicast routing entries, where the outgoing interface list includes the specified
interface.
match: Displays the multicast routing entries, where the outgoing interface list includes only the specified
interface.
Meaning
A register outgoing interface is available.
(S, G) entry to be deleted.
The (S, G) entry is in the smoothening process after active/standby switchover.
The (S, G) has been updated during the smoothing process.
The (S, G) entry has been repeatedly updated and must be deleted before a new
entry is added.
An entry is successfully added.
45