Peer Public-As-Only (Ipv6 Mbgp Address Family View) - HP 6125G Command Reference Manual

Parameters
ipv6-group-name: Specifies an IPv6 MBGP peer group by its name, a string of 1 to 47 characters.
ipv6-address: Specifies an IPv6 MBGP peer by its IP address.
value: Specifies a preferred value, in the range of 0 to 65535.
Description
Use peer preferred-value to assign a preferred value to routes received from an IPv6 MBGP peer or peer
group.
Use undo peer preferred-value to restore the default.
The preferred value defaults to 0.
Routes learned from peers each have a preferred value. Among multiple routes to the same destination,
the route with the greatest preferred value is selected.
If you both reference a routing policy and use the peer { ipv6-group-name | ipv6-address }
preferred-value value command to set a preferred value for routes from a peer, the routing policy sets the
specified preferred value for the routes that match it. Other routes that do not match the routing policy use
the value set with the peer preferred-value command. If the preferred value specified in the routing policy
is zero, the routes that match it also use the value set with the peer preferred-value command.
To learn how to use a routing policy to set a preferred value, see the command peer { group-name |
ipv6-address } route-policy route-policy-name { import | export } in this document, and the command
apply preferred-value preferred-value in the Layer 3—IP Routing Command Reference.
Examples
# Configure a preferred value of 50 for routes from IPv6 MBGP peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 enable
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 preferred-value 50

peer public-as-only (IPv6 MBGP address family view)

Syntax
peer { ipv6-group-name | ipv6-address } public-as-only
undo peer { ipv6-group-name | ipv6-address } public-as-only
View
IPv6 MBGP address family view
Default level
2: System level
Parameters
ipv6-group-name: Specifies an IPv6 MBGP peer group by its name, a string of 1 to 47 characters.
ipv6-address: Specifies an IPv6 MBGP peer by its IP address.
396