Peer Description - HP 6125G Command Reference Manual

interface-type interface-number: Specifies an interface by its type and number. The local device uses the
IP address of the specified interface as the source IP address when setting up a TCP connection with the
remote MSDP peer.
Description
Use peer connect-interface to create an MSDP peer connection.
Use undo peer connect-interface to remove an MSDP peer connection.
No MSDP peer connection is created by default.
Be sure to use this command before you use any other peer command. Otherwise, the system displays a
prompt that the peer does not exist.
Related commands: static-rpf-peer.
Examples
# Configure the router with the IP address of 125.10.7.6 as the MSDP peer of the local router, with
interface VLAN-interface 100 as the local connection port.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 connect-interface vlan-interface 100

peer description

Syntax
peer peer-address description text
undo peer peer-address description
View
MSDP view
Default level
2: System level
Parameters
peer-address: Specifies an MSDP peer address.
text: Specifies a description, a case-sensitive string of 1 to 80 characters including spaces.
Description
Use peer description to configure the description information for the specified MSDP peer.
Use undo peer description to delete the configured description information of the specified MSDP peer.
By default, an MSDP peer has no description information.
Related commands: display msdp peer-status.
Examples
# Add the descriptive text "CustomerA" for the router with the IP address of 125.10.7.6 to indicate that
this router is Customer A.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 description CustomerA
155