Dot1P-Priority (Mld-Snooping View); Drop-Unknown (Mld-Snooping View) - HP 6125G Command Reference Manual

Table 50 Command output
Field
general queries
specific queries
reports
dones
reports with right and wrong records
specific sg queries

dot1p-priority (MLD-snooping view)

Syntax
dot1p-priority priority-number
undo dot1p-priority
View
MLD-snooping view
Default level
2: System level
Parameters
priority-number: Specifies an 802.1p precedence for MLD messages, in the range of 0 to 7. A higher
number indicates a higher precedence.
Description
Use dot1p-priority to set the 802.1p precedence for MLD messages globally.
Use undo dot1p-priority to restore the default.
The default 802.1p precedence for MLD messages is 0.
Examples
# Set the 802.1p precedence for MLD messages to 3 globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] dot1p-priority 3

drop-unknown (MLD-snooping view)

Syntax
drop-unknown
undo drop-unknown
View
MLD-snooping view
Description
General query messages
Multicast-address-specific query messages
Report messages
Done messages
Reports that contain correct and incorrect records
Multicast-address-and-source-specific queries
222