Display Pim Join-Prune - HP 6125G Command Reference Manual

Table 26 Command output
Field
Interface
PIM version
PIM mode
PIM DR
PIM DR Priority (configured)
PIM neighbor count
PIM hello interval
PIM LAN delay (negotiated)
PIM LAN delay (configured)
PIM override interval (negotiated)
PIM override interval (configured)
PIM neighbor tracking (negotiated)
PIM neighbor tracking (configured)
PIM generation ID
PIM require generation ID
PIM hello hold interval
PIM assert hold interval
PIM triggered hello delay
PIM J/P interval
PIM J/P hold interval
PIM BSR domain border
Number of routers on network not using DR
priority
Number of routers on network not using
LAN delay
Number of routers on network not using
neighbor tracking

display pim join-prune

Syntax
display pim join-prune mode { sm [ flags flag-value ] | ssm } [ interface interface-type interface-number
| neighbor neighbor-address ] * [ verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Description
Interface name and its IP address
Running PIM version
PIM mode, dense or sparse
DR IP address
Configured priority for DR election
Total number of PIM neighbors
Hello interval
Negotiated prune message delay
Configured prune message delay
Negotiated prune override interval
Configured prune override interval
Negotiated neighbor tracking status (enabled/disabled)
Configured neighbor tracking status (enabled/disabled)
Generation_ID value
Rejection of hello messages without Generation_ID
(enabled/disabled)
PIM neighbor timeout time
Assert timeout time
Maximum delay of sending hello messages
Join/prune interval
Join/prune timeout time
Status of PIM domain border configuration (enabled/disabled)
Number of routers not using the DR priority field on the subnet
where the interface resides
Number of routers not using the LAN delay field on the subnet
where the interface resides
Number of routers not using neighbor tracking on the subnet
where the interface resides
110