Reset Igmp Ssm-Mapping Group; Robust-Count (Igmp View) - HP 6125G Command Reference Manual

reset igmp ssm-mapping group

Syntax
reset igmp ssm-mapping group { all | interface interface-type interface-number { all | group-address
[ mask { mask | mask-length } ] [ source-address [ mask { mask | mask-length } ] ] } }
View
User view
Default level
2: System level
Parameters
all: Specifies the multicast group information created based on the configured IGMP SSM mappings on
all interfaces (the first all), or all multicast group information created based on the configured IGMP SSM
mappings (the second all).
interface-type interface-number: Specifies an interface by its type and number.
group-address: Specifies a multicast group by its IP address, in the range of 224.0.0.0 to
239.255.255.255.
source-address: Specifies a multicast source by its IP address.
mask: Subnet mask of the multicast group address or multicast source address, 255.255.255.255 by
default.
mask-length: Subnet mask length of the multicast group address or multicast source address. For a
multicast group address, this argument is in the range of 4 to 32. For a multicast source address, this
argument is in the range of 0 to 32. For both cases, the default value is 32.
Description
Use reset igmp ssm-mapping group to clear multicast group information created based on the
configured IGMP SSM mappings.
Related commands: display igmp ssm-mapping group.
Examples
# Clear all multicast group information created based on the configured IGMP SSM mappings on all
interfaces.
<Sysname> reset igmp ssm-mapping group all

robust-count (IGMP view)

Syntax
robust-count robust-value
undo robust-count
View
IGMP view
Default level
2: System level
87