Display Bgp Multicast Group - HP 6125G Command Reference Manual

# Display detailed information about multicast routes that fall into the natural network of the IP address
(A multicast route is available).
<Sysname> display ip multicast routing-table 2.2.2.1 verbose
Routing Table : Public
Summary Count : 1
Destination: 2.2.2.1/32
Protocol: Direct
Preference: 0
IpPrecedence:
NextHop: 127.0.0.1
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active NoAdv
For more information about the fields, see
# Display detailed information about the longest matched active multicast route (No multicast route falls
into the natural network of the IP address).
<Sysname> display ip multicast routing-table 169.253.2.1 verbose
Routing Table : Public
Summary Count : 1
Destination: 169.0.0.0/8
Protocol: Direct
Preference: 0
IpPrecedence:
NextHop: 169.1.1.1
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active Adv
For more information about the fields, see

display bgp multicast group

Syntax
display bgp multicast group [ group-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: Monitor level
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
Tag: 0
Tag: 0
Process ID: 0
Cost: 0
QosLcId:
Interface: InLoopBack0
BkInterface:
Neighbour: 0.0.0.0
Label: NULL
Age: 05h38m46s
Table 37.
Process ID: 0
Cost: 0
QosLcId:
Interface: Vlan-interface1
BkInterface:
Neighbour: 0.0.0.0
Label: NULL
Age: 00h00m32s
Table 37.
176