Mld-Snooping Querier; Mld-Snooping Query-Interval - HP 6125G Command Reference Manual
Ip multicast
Hide thumbs
Also See for 6125G:
- Command reference manual (410 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping proxying enable
mld-snooping querier
Syntax
mld-snooping querier
undo mld-snooping querier
View
VLAN view
Default level
2: System level
Parameters
None
Description
Use mld-snooping querier to enable the MLD snooping querier function.
Use undo mld-snooping querier to disable the MLD snooping querier function.
By default, the MLD snooping querier function is disabled.
This command takes effect only if MLD snooping is enabled for the VLAN, and it does not take effect in
a sub-VLAN of an IPv6 multicast VLAN.
Related commands: mld-snooping enable and subvlan.
Examples
# Enable MLD snooping and the MLD snooping querier function in VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping querier
mld-snooping query-interval
Syntax
mld-snooping query-interval interval
undo mld-snooping query-interval
View
VLAN view
240
Advertisement
Table of Contents
