HP 6125G Command Reference Manual page 55

mask: Specifies the mask of the multicast group address or multicast source address, 255.255.255.255
by default.
mask-length: Specifies the mask length of the multicast group address or multicast source address. For a
multicast group address, the value ranges from 4 to 32. For a multicast source address, the value ranges
from 0 to 32. The default is 32 in both cases.
incoming-interface: Displays multicast forwarding entries, where the incoming interface is the specified
one.
interface-type interface-number: Specifies an interface by its type and number.
register: Displays multicast forwarding entries, where the incoming interface is the register interface of
PIM-SM.
outgoing-interface: Displays multicast forwarding entries, where the outgoing interface is the specified
one.
exclude: Displays the multicast forwarding entries, where the outgoing interface list excludes the
specified interface.
include: Displays the multicast forwarding entries, where the outgoing interface list includes the specified
interface.
match: Displays the forwarding entries, where the outgoing interface list includes and includes only the
specified interface.
statistics: Displays statistics for the multicast forwarding table.
slot slot-number: Displays the multicast forwarding entries of the specified IRF member switch. The
slot-number argument specifies the ID of an IRF member switch. The value range for the argument
depends on the number of member switches and their member IDs in the IRF fabric. If no IRF fabric exists,
the slot-number argument is the current device number.
port-info: Displays Layer 2 port information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display multicast forwarding-table to display multicast forwarding table information.
Multicast forwarding tables guide multicast forwarding. You can determine the forwarding state of
multicast traffic by viewing the multicast forwarding tables.
Related commands: display multicast routing-table, multicast forwarding-table downstream-limit, and
multicast forwarding-table route-limit.
Examples
# Display multicast forwarding table information.
<Sysname> display multicast forwarding-table
Multicast Forwarding Table
43