HP 6125G Command Reference Manual page 129

View
Any view
Default level
1: Monitor level
Parameters
group-address: Specifies the address of a multicast group, in the range of 224.0.1.0 to 239.255.255.255.
If you do not provide a group address, this command displays information about the RPs that correspond
to all multicast groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim rp-info to display the RP information.
The RP information includes the information of RPs dynamically found by the BSR mechanism and static
RPs.
Examples
# Display information about the RP that corresponds to the multicast group 224.0.1.1.
<Sysname> display pim rp-info 224.0.1.1
BSR RP Address is: 2.2.2.2
Priority: 192
HoldTime: 150
Uptime: 03:01:10
Expires: 00:02:30
RP mapping for this group is: 2.2.2.2
# Display information about the RP that corresponds to all multicast groups.
<Sysname> display pim rp-info
PIM-SM BSR RP information:
Group/MaskLen: 224.0.0.0/4
RP: 2.2.2.2
Priority: 192
HoldTime: 150
Uptime: 03:01:36
Expires: 00:02:29
Table 30 Command output
Field
BSR RP Address is
Group/MaskLen
RP
Description
IP address of the RP.
Multicast group that the RP serves.
IP address of the RP.
117