Display Bgp Multicast Routing-Table Dampening Parameter - HP 6125G Command Reference Manual

Network
*d 77.0.0.0
Table 44 Command output
Field
From
Reuse
For more information about the output, see

display bgp multicast routing-table dampening parameter

Syntax
display bgp multicast routing-table dampening parameter [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast routing-table dampening parameter to display IPv4 MBGP route dampening
parameters.
Related commands: dampening.
Examples
# Display IPv4 MBGP route dampening parameters.
<Sysname> display bgp multicast routing-table dampening parameter
Maximum Suppress Time(in second) : 3069
Ceiling Value
Reuse Value
Reach HalfLife Time(in
Unreach HalfLife Time(in
Suppress-Limit
From
12.1.1.1
Description
IP address from which the route was received
Reuse time of the route
Table
: 16000
: 750
second) : 900
second): 900
: 2000
190
Reuse Path/Origin
00:29:20 100?
43.